Switching-Off Servo Flash Mode; Option Menu; Synchronisation On The Second Curtain (Rear) - Metz Mecablitz 64 AF-1 digital - Canon Bedienungsanleitung

10.4.5 Switching-off SERVO flash mode

SYNC
M-Servo
• Press the displayed mode of operation on
the touch display as many times as it takes
M-
for the display for selecting the mode of
m
Zoom 35
operation to appear.
m
P
1/16
O
MODE
• Press the
touch display and select the desired mode
of operation, e.g
ETTL
A
• Press the sensor button on the touch
p
q
display for the mode of operation, e.g
ETTL
The selected mode of operation is adopted.
0.8- 9.0 m
M-
5,6
m
35
F
Zoom
m
EV
sensor buttons on the
ETTL
.
ETTL
.

11 OPTION menu

11.1 Synchronisation on the second cur-
tain (REAR)
Several cameras feature second curtain syn-
chronisation.
Depending on its operating mode, the came-
ra sets shutter speeds slower than its sync
speed. On some cameras the REAR function
is not possible in certain operating modes
(e.g., certain vari- or subject programs, or
with red eye reduction). In these cases, the
REAR mode cannot be selected and/or is
automatically cancelled or ignored (see
camera's operating instructions).
For some cameras, the synchronisation can
be set to the 2nd shutter curtain on the
camera. After tapping the shutter release, the
REAR mode is automatically set on the flash
unit.
k
191