Herunterladen Inhalt Inhalt Diese Seite drucken

Rapid Mode; Secondary Reflector (Sub-Refl.) - Metz Mecablitz 64 AF-1 digital -Pentax Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Mecablitz 64 AF-1 digital -Pentax:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

11.3 RAPID mode

In flash modes A and PTTL, the recycling
times depend on how much light is needed
for the exposure. If the recycling time is too
long, the RAPID function can be switched on
in the A and PTTL flash modes. The RAPID
function is recommended especially in cases
where fast recycling times are more impor-
tant and maximum flash
output is less important, such as in relatively
small spaces. However, the guide number is
reduced by 1 level, e.g. from a guide number
of 36 (at ISO 100 zoom 35) to guide number
25 (at ISO 100 zoom 35).
Setting procedure
• Press the
for the selection menu to appear.
OPTION
• Press the
k
touch display.
O
OPTION
• Press the
SYNC
touch display and select
RAPID
• Press the
SUB-REFL.
touch display.
p
q
• Press the
the touch display and switch the RAPID
O
RAPID
function on or off.
OFF
The setting is adopted immediately.
After activation of the RAPID function, „
ON
appears in the display.
196
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
RAPID
.
RAPID
sensor button on the
ON
OFF
or
sensor button on
"

11.4 Secondary reflector (SUB-REFL.)

The secondary reflector is used for frontal
brightening when using a bounce flash if the
main reflector is tilted sideways or upwards.
If the light from the secondary reflector is too
large, it can be reduced by half.
Setting procedure
• Press the
for the selection menu to appear.
• Press the
OPTION
touch display.
O
OPTION
• Press the
touch display and select
RAPID
SUB-REFL.
• Press the
ZOOM SIZE
touch display.
p
q
SUB-REFL. O
• Press the
ton on the touch display and switch the
OFF
secondary reflector on or off. The setting is
1/1
adopted immediately.
1/2
Upon switching on the secondary reflector,
appears on the display
„ 1/1" or „ 1/2" is displayed in the INFO
menu.
1/1 means full light output, 1/2 means half
light output.
D
button as often as it takes
OPTION
sensor button on the
sensor buttons on the
SUB-REFL.
.
SUB-REFL.
sensor button on the
1/1
1/2
OFF
,
or
sensor but-

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis