Flash Exposure Memory - Metz MECABLITZ 50 AF-1 digital Nikon Bedienungsanleitung

10.4 Flash exposure memory

Some Group E cameras (see Table 1) have flash exposure memory (FV memo-
ry). This is supported by the flash unit in i-TTL and i-TTL BL flash mode. It can be
used to define and store the exposure level for the subsequent shot before the
shot is actually taken. This can be useful when, for example, the flash exposure
has to be adjusted to specific details that may not be necessarily be identical
with the main subject.
The function is activated on the camera, in some instances as an individual func-
tion. The subject detail to which the flash exposure is to be adjusted is sighted
and brought into focus with the AF sensor/metering window in the camera.
When the AE-L/AF-L button (the terminology may vary with the camera model)
on the camera is pressed, the flash unit fires a test flash. The stored metering
value, for example „EL", is then displayed in the camera viewfinder. The camera
uses the reflected light of the test flash to determine the light output required for
the subsequent exposure.
The actual main subject can then be brought into focus with the camera's
AF sensor/metering window. When the shutter release is pressed, the picture
will be exposed with the previously defined light output of the flash unit!
For more detailed information on adjustments and handling, refer to the
camera's operating instructions!
108