To Change The Default Resolution; Deleting Faxes From Memory; To Delete Faxes From Memory; Sending Faxes From The Software - HP LaserJet 3330mfp Handbuch

Deleting faxes from memory

CAUTION

Sending faxes from the software

Note
ENXC

To change the default resolution

Resolution affects the quality, in dots per inch, of documents to be faxed.
It also affects the transmission speed.
Use this procedure to change the default resolution for all faxes.
1 Press resolution to display the current resolution setting.
2 Use the < or > button to display the desired resolution setting.
3 Press menu/enter to save the selection.
Use this procedure only if you are concerned someone else has access
to your product and will try to reprint faxes from the reprint memory.
In addition to clearing the reprint memory, this procedure clears any fax
currently being sent, unsent faxes pending redial, faxes scheduled to be
sent at a future time, and faxes not printed or forwarded.

To delete faxes from memory

1 Press menu/enter.
2 Press > once to display Fax Functions and press menu/enter.
3 Use the < or > button to select Clear Saved Faxs, and press
menu/enter.
4 Press menu/enter to confirm the deletion.
This section and the following section contain some instructions about
sending and receiving faxes using the software that came with the
product. All other software-related topics are covered in the software
help, which can be accessed from the software program's Help menu.
The HP LaserJet Director and HP LaserJet Document Manager are not
supported for Microsoft Windows 95. If you use Windows 95, you can send,
but not receive, faxes with the software. However, all fax features are
available from the control panel.
You can fax electronic documents from your computer in the following
situations:
The HP LaserJet product is connected directly to your computer or
connected to your computer over a network using an HP Jetdirect
print server.
Deleting faxes from memory 21