To Insert A Pause Or Wait; Inserting A Dial Prefix; To Set The Dial Prefix - HP LaserJet 3330mfp Handbuch

Inserting a dial prefix

ENXC
9
0
*
#

To insert a pause or wait

You can insert pauses into a fax number you are dialing or programming
to a one-touch key, speed-dial code, or group-dial code. Pauses are
often needed when dialing internationally or connecting to an outside
line.
Press pause/redial to enter a three-second pause in your dialing
sequence. A comma appears on the control panel display, indicating the
pause will occur at that point in the dialing sequence.
A dial prefix is a number or group of numbers automatically added to the
beginning of every fax number you enter at the control panel or from the
software.
By default, this setting is off. You may want to turn this setting on and
enter a prefix if, for example, you have to dial a number such as 9 to get
a phone line outside your company's phone system. While this setting is
on, you can still dial a fax number without the dial prefix by using manual
dial. For instructions, see

To set the dial prefix

1 Press menu/enter.
2 Use the < or > button to select Fax Setup, and press menu/enter.
3 Press > once to select Fax Send Setup, and press menu/enter.
4 Use the < or > button to select Dial Prefix, and press menu/enter.
5 Use the < or > button to select On or Off, and press menu/enter.
6 If you choose On, use the numeric buttons to enter the prefix, and
press menu/enter. You can use numbers, pauses, and dialing
symbols.
W X Y Z w x y z
0
( ) + - . / , " * & @
space #
"Using manual dial" on page 32.
Inserting a dial prefix 31