Sending Fax Problems - HP LaserJet 3330mfp Handbuch

Sending fax problems

Problem
Faxes quit during
sending.
The product is receiving
faxes but is not sending
them.
42 Chapter 4 Troubleshooting
Use the table in this section to solve problems that might occur when
sending faxes.
Cause
The fax machine to which you
are sending might be
malfunctioning.
Your phone line might not be
working.
If your product is on a PBX
system, the PBX system
might be generating a dial
tone the product cannot
detect.
There might be a poor phone
connection.
The fax machine to which you
are sending might be
malfunctioning.
Solution
Try sending to another fax
machine.
Do one of the following:
Turn up the volume on the
product and press fax/send on
the control panel. If you hear a
dial tone, the phone line is
working.
Disconnect the product from
the phone jack and connect a
phone. Try to make a phone
call to make sure the phone
line is working.
Disable the detect dial tone setting.
See the dial tone setting topic in
the electronic user guide.
Try again later.
Try sending to another fax
machine.
ENXC