Setting Rings-To-Answer; Recommended Rings-To-Answer Table - HP LaserJet 3330mfp Handbuch

Setting rings-to-answer

Type of phone line
Dedicated fax line (receiving
only fax calls)
One line with two separate
numbers and ring pattern
service
Shared line (receiving both fax
and voice calls) with only an
attached phone
Shared line (receiving both fax
and voice calls) with an attached
answering machine or computer
voicemail
ENXC
When the answer mode is set to automatic, the product's
rings-to-answer setting determines the number of times the phone will
ring before an incoming call is answered.
If the product is connected to a line receiving both fax and voice calls (a
shared line) with an answering machine, you may need to adjust the
rings-to-answer. The number of rings-to-answer for the product must be
greater than the rings-to-answer on the answering machine. This allows
the answering machine to answer the incoming call and record a
message if it is a voice call. When the answering machine answers the
call, the product listens to the call and automatically answers it if it
detects fax tones.
The default setting for rings-to-answer is two.

Recommended rings-to-answer table

Use the following table to determine the number of rings-to-answer to
use.
Recommended rings-to-answer
Germany: leave at two rings.
Austria: leave at two rings or set to one ring.
Germany: leave at two rings.
Austria: leave at two rings or set to one ring.
(If you have an answering machine or computer
voicemail for the other phone number, make sure the
product is set to a lesser number of rings than the
answering system. Also, see
patterns" on page
Set to five rings.
Two rings more than the answering machine or computer
voicemail. (You cannot set the product to more than six
rings.)
"Enabling answer ring
18.)
Setting rings-to-answer 17