Operating Procedures; Unit Diagram; General Information; Accessories - Kärcher NT 801 B1 Bedienungsanleitung

English

1. Operating Procedures

Unit Diagram

1 Handle
2 Suction hose connection
3 Container
4 Swivel rollers
5 Parking brake
6 Container locking mechanism
7 Blower assembly
8 Indicator lamp (Filter condition)
9 ON/OFF switch
10 Push handle

General information

Accessories

Starting the unit

10
9
8
7
6
5
The NT 801 B1 is suitable for vacuuming dry dust that is harmful to
health off machinery and other equipment, as well as dry and
flammable dust that equates to Staubexplosionsklassen St 1 und St
2 in Zone 11 whereby the cleaned air is discharged into the room in
which cleaning is taking place; Verwendungskategorie C, B1.
The supplied accessories conduct electricity. No other
accessories may be used!
Never operate the cleaner without a filter fitted otherwise the
suction motor will be damaged, and there will be a health
hazard from the increased discharge of fine dust particles!
Suction hose
Elbow
Tube
Crevice nozzle
Floor nozzle
Multi-purpose nozzle
Filter cartridge
Safety filter bag
• Wheel the unit to the place where cleaning is to take place, and
apply the parking brake if required.
• Insert the suction hose into the connection on the main unit, and
turn it to the right until it locks in place.
• Fit the required accessories by turning them to the right.
• Plug the unit into the mains electricity supply.
• Switch on the cleaner by turning the ON/OFF switch to position
1.
NT 801 B1
1
2
3
4
Order No. 4.440-558
Order No. 4.036-032
Order No. 4.025-372
Order No. 4.763-243
Order No. 4.763-244
Order No. 4.763-242
Order No. 6.904-134
Order No. 6.904-120
9