testo 265 Bedienungsanleitung Seite 17

3. Product description
Alarm LED
The Alarm LED indicates in which area the
TPM value is:
green: TPM value is below the bottom limit
yellow: TPM value is between the bottom
red:
The Alarm LED is switched on when
delivered and the TPM limit values are set as
follows:
- Lower limit value: 20%
- Upper limit value: 24%
See Section 5. Configuring instrument, if you
wish to change these settings.
8
and top limit
TPM value is above the top limit
Battery capacity
A warning symbol lights up in the display
( ) when the battery capacity starts to
decrease. At this point, the remaining
capacity is approximately 8h.
The instrument switches itself off if the
battery voltage is too low.
Change the battery (See 6.1 Changing
the battery)
Operating buttons
Other
Battery compartment (at back of
instrument).
Oil quality (% TPM) and temperature
sensor.
Max.
immersion
depth
Min.
immersion
depth
3. Product description
: Holds reading
: Switches instrument on/off
9