Switching Off - testo 265 Bedienungsanleitung

4. Operation
1 Immerse sensor in deep-fried oil. Adhere
to immersion depth!
2 Wait for adaption time (approx. 30s).
3 Measurement is finished once the
temperature display does not change
significantly.
4 Take readings
components) is displayed if the
temperature is inside the measurement
range (+40 to +210 °C).
Limit values
Scientific studies recommend that cooking
oil is changed from approx. 24% TPM.
However, the limit value differs from country
to country. If the measured values exceed
the limit value of the country, the cooking oil
should be changed.
Hold function
Press
H H O O L L D D is shown in the display, the
readings are frozen.
The Auto-OFF function is deactivated if
the H H O O L L D D function is activated (See

4.3 Switching off)!

Press
H H O O L L D D goes out, current readings are
displayed.
12
. The TPM value (polar
briefly(< 1s).
again.
4. Operation
4.3 Switching off
Keep pressed for approx. 3s.
- Display switches off, instrument is
switched off.
Auto-OFF function
If no buttons are activated over a period of
5 minutes, the instrument switches itself off.
If the HOLD function is activated, the
Auto-OFF function is deactivated (See
4.2 Measuring, Section on HOLD func-
tion)!
13