testo 265 Bedienungsanleitung Seite 15

Contents
Preface/Copyright....................................2
General information..................................3
Contents..................................................4
1. Basic safety instructions ..........................5
2. Intended use............................................6
3. Product description ................................7
3.1 Power supply ..................................7
3.2 Display and control elements ............7
4. Operation ..............................................10
4.1 Switching on ..................................10
4.2 Measuring ......................................11
4.3 Switching off ..................................13
5. Configuring the instrument ....................14
6. Care and Maintenance ..........................16
6.1 Changing the battery ......................16
6.2 Cleaning the instrument ..................16
6.3 Adjustment ....................................16
7. Troubleshooting ....................................17
8. Technical data........................................18
8.1 Measuring ranges and accuracies ..18
8.2 Additional instrument data ..............18
9. Ordering data ........................................19
Warranty ................................................20
Customer service / Calibration service ..22
Notes ....................................................23
Testo worldwide ....................................25
4
1. Basic safety measures
Avoid electrical hazards:
Never make measurements with the unit and its probes on or near live
components unless the unit is expressly approved for current and
voltage mesurements.
Protect the unit:
Never store the unit together with solvents (e.g. acetone).
The housing parts should not come into contact (e.g. splashes,
accidental submersing) with the cooking oil.
Preserve product safety/warranty entitlement:
Operate the instrument only within the parameters specified in the
technical data.
Please handle the instrument with care.
Force should never be applied.
The temperature data for the probes only refer to the sensor measuring
range. Never subject handles or pipes to temperatures greater than
70°C unless they are expressly approved for higher temperatures.
The instrument should only be opened for maintenance and repair
work if expressly described in the Instruction manual.
Only carry out the maintenance and repair work described in the
Instruction manual. Please follow instructions. For safety reasons, only
original spare parts from Testo should be used.
Any other work should only be carried out by authorised trained
personnel. Otherwise responsibility for the perfect functioning of the
instrument following repairs and for the validity of approvals will be
denied by Testo.
Ensure correct disposal:
Dispose of defective rechargeable batteries and spent batteries
responsibly.
You can return your instrument directly to us at the end of its service
life. We will dispose of it responsibly.
5