Rotax 125 MAX evo Betriebsanleitung Seite 74

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
 Optional, see Fig. 34.
Insert impulse nozzle (pos. 6) about 25 mm into the 420 mm pressure line (part no.
201576) (pos. 7) using an Allen key SW4. Pay attention to the mounting direction!
The function is also given without an impulse nozzle, this only serves to choke the
opening and closing of the exhaust valve.
 Note: In order to prevent the displacement of the impulse nozzle (pos. 6), a cable tie (pos.
8) at the pressure line should be attached directly afterwards. Do not tie up the
pressure line completely!
 Connect 420 mm pressure line (pos. 7) with the check valve (pos. 4).
 Attach the 280 mm pressure line (pos. 1) to the exhaust valve (pos. 2) and to the
magnetic valve (pos. 3). Secure the pressure line on the magnetic valve with a tie
wrap (pos. 4).
Page 21/53
Fig. 34
Fig. 35
Fig. 36
Edition 07/2016