Rotax 125 MAX evo Betriebsanleitung Seite 67

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Configuration 125 Junior MAX evo, Mini MAX evo und Micro MAX evo:
See Fig. 21.
 Note: 125 Junior MAX evo, Mini MAX evo and Micro MAX evo do not have a RAVE
control unit. Please install the dummy plug (pos. 1) (part no. 666900, available as
spare part) to avoid entry of dirt and dust.
 Connect electric plug to ignition coil.
 Use the tie wrap medium (pos. 1) to fix the wire of the ignition coil.
 Attention: This step is necessary to avoid vibration of the wiring harness.
 Take the shift contact and make a loop (pos. 1), then fix with tie wrap (pos. 2). See
Fig. 23.
 Tie wrap (pos. 2) must keep following wires together:
a)
b)
c)
Page 14/53
ECU wire
Ignition coil wire
Loop of shift contact wire
Fig. 21
Fig. 22
Edition 07/2016