Rotax 125 MAX evo Betriebsanleitung Seite 65

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
 Fix Solenoid valve (pos. 1) with two Allen screws M5 (pos. 2), washers (pos. 3) and
lock nuts M 5 (pos. 4) onto the mounting plate (MAX evo only).
 For the engines Junior MAX evo, Mini MAX evo and Micro MAX evo use the holes
(pos. 1) to fix blind plugs (part no. 666900) (pos. 2) with tie wraps (pos. 3).
 Note:
Blind plugs (part no. 666900) are not included, but available as spare parts.
 Mount retaining plate MAX (pos. 1) in correct position onto the rubber buffer (pos. 3)
of the mounting plate using lock nuts M6 (pos. 2).
 Note: One thread end of the rubber buffer has to be longer to fix the ground wire.
 Note: Use of washers is not necessary.
Page 12/53
Fig. 16
Fig. 17
Fig. 18
Edition 07/2016