Rotax 125 MAX evo Betriebsanleitung Seite 69

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
 Install whole bracket kit with two Allen screws M6x20 (pos. 1) with washers M6 (pos.
2) and lock nuts M6 (pos. 3) onto the gear cover (pos. 4)
 Note:
Usage of washers (pos. 2) is nonobligatory. Just make sure, polyamide ring of the
nut secures the connection.
 Note:
For engine removal, just lay the bracket kit aside. It is not necessary to disassemble
the whole construction.
Page 16/53
Fig. 26
Edition 07/2016