Replacing The Aquaclean Filter - Saeco HD8924 Bedienungsanleitung

English
14
- Then the machine ready screen appears with the AquaClean 100% icon
to indicate that the filter has been activated.

Replacing the AquaClean filter

Replace the AquaClean filter when the filter icon starts flashing on the display.
Filter capacity indications
- When you install a new filter, the status indication above the filter icon is
100%.
- This percentage gradually drops from 100% to 20% as you use the machine.
- The filter icon starts flashing 2 seconds on and 2 seconds off when the filter
capacity has dropped to 10%.This is the indication that the filter performance
has decreased so much that you should remove the filter and install a new
one.
- If you do not replace the filter, the filter icon starts flashing 1 second on and
1 second off when the capacity has dropped to 0%. If you ignore this
indication, the filter icon will disappear from the display.