Replacing The Aquaclean Filter; Using The Machine; Brewing Coffee With Beans; Adjusting The Coffee Quantity - Saeco Intelia Deluxe HD8902 Installationsanleitung

English
12

Replacing the AquaClean filter

Display icon AquaClean filter
10% + icon flashes
0% + icon flashes
0% and icon disappears from display

Using the machine

Brewing coffee with beans

Adjusting the coffee quantity

Adjusting the grind setting

Note: The display shows a tick icon to confirm the activation.
7 To rinse the filter, press the HOT WATER button and let half a litre water
flow out from the hot water/steam dispensing spout. Discard this water.
Note: It can take a while until water comes out of the hot water
dispensing spout. The filter needs to be fully filled and rinsed with water.
8 Use the sticker attached to the plastic packaging of the AquaClean filter
to write down the date of the next filter replacement (after 3 months).
Place the sticker on the water tank.
The filter and machine are now ready for use.
Replace the filter every 3 months or at machine request.
What to do
The performance of this filter is decreasing. It is
recommended to remove the old filter and place the
new filter as described in section 'AquaClean filter
installation' to retain proper filter performance.
Remove the old filter immediately and place the new
filter as described in section 'AquaClean filter
installation'. When you activate a new filter, the display
shows the word NEW. Press the OK button to confirm
the activation.
You first need to descale the machine before you can
place and activate a new filter.
After 8 filter replacements you need to descale the machine chapter
'Descaling', section 'Descaling procedure'.
1 Adjust the coffee dispensing spout to suit the size of your cup.
2 Press the AROMA STRENGTH button to select the desired coffee
strength from 1-5 beans.
3 Press the ESPRESSO button to brew an espresso or press the ESPRESSO
LUNGO button to brew a coffee.
1 Press and hold the ESPRESSO button or ESPRESSO LUNGO button until
the display shows the word MEMO.
2 When the cup contains the desired amount of coffee, press the OK
button to save the selected quantity.
Note: You can only adjust the grinder settings when the machine is grinding
coffee beans.