Brewing Drinks With The Automatic Milk Frother; Preparing The Automatic Milk Frother; Milk Frothing - Saeco HD8924 Bedienungsanleitung

3 Scroll to select ristretto or espresso double.

Brewing drinks with the automatic milk frother

Note: Use cold milk (at a temperature of approximately 5°C/41°F) with a protein
content of at least 3% to ensure an optimal frothing result. You can use whole milk
or semi-skimmed milk.

Preparing the automatic milk frother

Warning: Danger of burning! Dispensing may be preceded by small jets of hot
water. When steam is used, the steam tube and the chrome-plated cover may
reach high temperatures. Never touch them with bare hands. The automatic
milk frother must be handled only as shown in the figures.
1 Insert the suction tube into the automatic milk frother.
2 Slide the automatic milk frother onto the rubber fitting of the chrome-plated
cover.
3 Make sure that the automatic milk frother is positioned correctly. If you
cannot slide it onto the steam tube, rotate the chrome-plated cover. The
automatic milk frother is assembled correctly when the projection fits into
the slot of the chrome-plated cover.
4 Insert the other end of the suction tube into the milk pack.

Milk frothing

1 Place a cup under the automatic milk frother and press the MILK FROTH
button.
2 The machine dispenses a preset quantity of milk froth into the cup or glass.
3 To stop dispensing milk froth, press the OK button or the MILK FROTH
button.
MILK FROTH
- It will take a few seconds before the machine stops dispensing
- After frothing, you can immediately brew a coffee or dispense hot water.
completely.
English
19