Saeco HD8924 Bedienungsanleitung Seite 11

English
10
INSERT FILTER
FILL WATER TANK
PLACE A CONTAINER
UNDER THE SPOUT
AND STEAM TUBE
ACTIVATING
FILTER
17If you want to install the AquaClean filter, press the OK button. Activation
will take 2 minutes. The display reminds you: Insert filter, fill water tank.
18Remove the AquaClean filter from its packaging. Shake the filter for about 5
seconds.
19Immerse the AquaClean filter upside down in a jug with cold water and wait
until no more air bubbles come out.
20Remove the water tank from the machine and empty it.
21Insert the AquaClean filter vertically onto the filter connection. Push the
AquaClean filter to the lowest possible point. Make sure that the filter fits
tightly and the seal is in the right position, to guarantee the best
performance.
22Fill the water tank with fresh water up to the MAX level indication and place
it back into the machine. Press the OK button to confirm.
23The display reminds you to place a container under the coffee dispensing
spout and steam tube. Press the OK button to confirm. The machine starts
dispensing water.
24The filter activation screen appears with a progress bar showing the progress
of the filter activation.