Cleaning Of The Automatic Milk Frother; Daily Cleaning Of The Automatic Milk Frother; Monthly Cleaning Of The Automatic Milk Frother; Cleaning Cycle With Milk Circuit Cleaner And Water - Saeco HD8924 Bedienungsanleitung

3 Apply some grease around the shaft in the bottom of the brew group.
4 Apply some grease to the rails on both sides (see figure).
5 Insert the brew group as described in section 'Weekly cleaning of the brew
group'.

Cleaning of the automatic milk frother

It is important to clean the automatic milk frother after every use to ensure
proper hygiene and to guarantee perfectly frothed milk.

Daily cleaning of the automatic milk frother

1 Insert the suction tube into a jug filled with fresh water.
2 Place an empty container under the automatic milk frother. Press the MILK
FROTH button.
3 When the water that flows out of the automatic milk frother is clean, press
the ESC button to stop dispensing.

Monthly cleaning of the automatic milk frother

Monthly cleaning of the automatic milk frother consists of two cleaning cycles
carried out in sequence: the first cycle requires the use of Saeco milk circuit
cleaner dissolved in water and the second cycle uses only water to rinse the
circuit.
Caution: If the machine has been recently used, the steam tube and the
automatic milk frother could be hot.

Cleaning cycle with milk circuit cleaner and water

1 Pour the contents of a Saeco milk circuit cleaner sachet into a jug. Add half a
liter of water. Insert the suction tube into the jug. Place a container under
the automatic milk frother.
2 Press the MILK FROTH button.
- You can press the OK button to stop or let the machine dispense until it
stops automatically.
3 Rinse the jug with fresh water and fill it with half a liter of fresh water for the
rinsing cycle.
4 Empty the container and place it back under the automatic milk frother.
5 Insert the suction tube into the jug.
6 Press the MILK FROTH button
- You can press the OK button to stop or let the machine dispense until it
stops automatically.
English
25