Meaning Of Error Codes - Saeco HD8924 Bedienungsanleitung

10
SUPPORT REQUIRED

Meaning of error codes

Error code
1
3 - 4
5
- Remove the coffee grounds container and empty it.
- There is too much powder in the brew group. Clean the brew group.
- If an error code is triggered, check the section 'Meaning of error codes' to
see what the code on the display means and what you can do. The machine
cannot be used when this icon is on the display.
Problem
Coffee grinder blocked
The brew group cannot
be removed.
Water circuit problem
Cause
Coffee exit duct clogged
The brew group is
blocked by dirt or is not
positioned correctly.
There is air in the water
circuit.
English
Possible solution
Clean the coffee exit
duct thoroughly with the
handle of the
multifunctional tool or a
spoon handle.
Close the service door.
Switch the machine off
and back on again. Wait
for the 'machine ready'
icon on the display and
then remove the brew
group.Clean the brew
group and make sure it is
well greased.
Remove the AquaClean
filter and switch the
machine off and on again.
If the machine works,
replace the filter.
31