Replacing The Aquaclean Filter; Replacing The Filter After 8 Filters Were Used - Saeco Incanto HD8911 Bedienungsanleitung

ON
OFF
0 / 8
AQUA CLEAN
FILTER
1 / 8

Replacing the AquaClean filter

AQUA CLEAN
FILTER
1 / 8
0%
AQUA CLEAN
FILTER
NEW?
AQUA CLEAN
FILTER
2 / 8
2 Select ON on the display, press the OK button to confirm.
-
The display automatically updates the number of filters used.
-
Then the machine ready screen appears with the AquaClean 100%
icon to indicate that the filter has been installed.
3 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard
this water.
Note: Replace the AquaClean filter as soon as the capacity has dropped to
0% and the filter icon flashes quickly. Replace the AquaClean filter at least
every 3 months, even if the machine has has not yet indicated that
replacement is required.
1 Take out the AquaClean filter. Follow the steps in section 'Preparing and
installing the AquaClean filter'.
2 Press the MENU button, scroll to 'AquaClean' filter and press the OK
button to confirm.
-
The display asks if you want to activate a new filter.
3 Press the OK button to confirm.
-
The display automatically updates the number of filters used.
4 Dispense 2 cups of hot water (0.5 l) to complete the activation. Discard
this water.

Replacing the filter after 8 filters were used

1 When the filter icon starts flashing on the display, press the MENU
button, scroll to 'AquaClean' filter and press the OK button to confirm.
English
15