Electromagnetic Fields (Emf); Machine Overview - Saeco HD8924 Bedienungsanleitung

English
6
- Do not place the machine on a hotplate or directly next to a hot oven,
heater or similar source of heat.
- Only put roasted coffee beans in the bean hopper. If ground coffee, instant
coffee, raw coffee beans or any other substance is put in the coffee bean
hopper, it may cause damage to the machine.
- Let the machine cool down before inserting or removing any parts. The
heating surfaces may retain residual heat after use.
- Never fill the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
- Never use souring pads, abrasive cleaning agents or aggressive liquids such as
petrol or acetone to clean the machine. Simply use a soft cloth dampened
with water.
- Descale your machine regularly. The machine indicates when descaling is
needed. Not doing this will make your appliance stop working properly. In
this case repair is not covered under your guarantee.
- Do not keep the machine at temperatures below 0°C.Water left in the
heating system may freeze and cause damage.
- Do not leave water in the water tank when the machine is not used over a
long period of time. The water can be contaminated. Use fresh water every
time you use the machine.

Electromagnetic fields (EMF)

This machine complies with all applicable standards and regulations regarding
exposure to electromagnetic fields.

Machine overview

1 User interface
2 ESPRESSO button
3 ESPRESSO LUNGO button
4 CAFFÈ CREMA button
5 ESC button
6 OK button
7 Standby button
8 Display
9 MENU/SPECIAL DRINKS button
10 DOWN button
11 UP button
12 MILK FROTH button
13 HOT WATER button
14 AROMA STRENGTH button
15 Steam tube
16 Automatic milk frother
17 Adjustable removable coffee dispensing spout
18 Lid of the water tank
19 Lid of the bean hopper
20 Lid of the pre-ground coffee compartment
21 Service door
22 Socket for cord
23 Main switch
24 Drip tray release button