Function Of The Control Channels - 8 Bit Protocol; Addressing The Sc-980 - Futurelight Scan SC - 980 Bedienungsanleitung

4.1.13 Channel 13 - Iris
0
1 - 179
180 - 191
192 - 223
224 - 255
4.1.14 Channel 14 - Focus, multistep zoom
0 - 85
86 - 170
171 - 255
4.1.15 Channel 15 - Shutter, Strobe
0 - 31
32 - 63
64 - 95
96 - 127
128 - 159
160 - 191
192 - 223
224 - 255
4.1.16 Channel 16 - Dimmer intensity
0 - 255

4.2 Function of the control channels - 8 bit protocol:

DMX
1 2 3
Channel
PAN/TILT
Function PAN
TILT
SPEED
The control board on the top side of the SC-980 allows you to assign the DMX fixture address, which is defined
as the first channel from which the SC-980 will respond to the controller.
If you set, for example, the address to channel 5, the SC-980 will use the channel 5 to 20 for control.
Please, be sure that you don't have any overlapping channels in order to control each SC-980 correctly and
independently from any other fixture on the DMX data link.
If two, three or more SC-980 are addressed similarly, they will work similarly.
For address setting follow this procedure:
1. Switch On the SC-980 and wait until the fixture reset has finished ("rSt" is flashing at the display).
2. Press the [Mode] key in order to access the main menu. Browse through the menu by pressing the [Up]
and [Down] keys until the display shows "A001". Confirm by pressing [Enter] key and the letter "A" will flash.
3. Use the [Up] and [Down] keys to select the desired address.
4. Confirm by pressing [Enter] or [Mode] to cancel.
Controlling:
After having addressed all SC-980, you may now start operating these via your lighting controller.
Note:
After switching On, the SC-980 will automatically detect whether DMX 512 data's are received. If there are not
received these data's at the DMX input, the display will start to flash "A001" with actually set address.
Open
Max. diameter to min. diameter
Closed
Pulse closing slow to fast
Pulse opening fast to slow
Zoom 15° (Continuous adjustment from far to near)
Zoom 21° (Continuous adjustment from far to near)
Zoom 28° (Continuous adjustment from far to near)
Shutter closed
No function (Shutter open)
Strobe-effect from slow to fast (max. 10 flashes/second)
No function (Shutter open)
Pulse-effect in sequences
No function (Shutter open)
Random strobe-effect from slow to fast
No function (Shutter open)
Gradual adjustment of the dimmer intensity from 0 to 100 %
4 5 6
FAN
COLOURS COLOURS
ON/OFF
WHEEL 1 WHEEL 2
LAMP

5. Addressing the SC-980

7 8 9
STATIC ROTATING
EFECTS
GOBOS GOBOS ROTATION
28
10 11 12 13
GOBO
IRIS FOCUS STROBO DIMMER
14