Spec -Special Functions - Futurelight Scan SC - 980 Bedienungsanleitung

- Power On time:
By this option you can read the total number of hours that the SC-980 has been powered On. Press [Enter] or
[Mode] to return to the main menu.
- Switch On / Off the lamp:
Use the [Up] and [Down] keys to select "On" if you wish the switch On the lamp or "Off" if you wish switch Off
the lamp and press [Enter] to confirm or [Mode] to cancel and return to the main menu.
- Test program:
This function allows you to run a special test program without an external controller, which show you some
possibilities of using SC-980. Press the [Enter] key to run the test program.
- Reset Function:
Press [Enter] key to run reset. This option enables the SC-980 to index all effects (functions) and return to their
standard positions.

7.2 SPEC -Special functions

Use the [Up] and [Down] keys to browse through the special functions and select the one by pressing [Enter].
- Manual control of effects
This function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down] keys to
select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the menu.
- Lamp on automatically
This function enables to switch On the lamp automatically after switching On the fixture. Use the [Up] and
[Down] keys to select „On" if you wish to switch On the lamp automatically after switching On the fixture or „Off"
if you wish the camp off after switching On the fixture and press [Enter] to confirm or [Mode] to cancel and return
to the menu.
- DMX values
Readout DMX values of each channel received by the fixture. Use the [Up] and [Down] keys to select desired
channel and press [Enter] to read its value coming to the fixture or [Mode] to cancel and return to the menu.
31