Beampath - Futurelight Scan SC - 980 Bedienungsanleitung

Damages caused by non-observance are not subject to warranty.
Insert the lamp now. Do not touch the glass-bulb bare-handed during the installation! Please follow the lamp
manufacturer's notes!
Before you close the housing again, make sure that the lamp is installed tightly into the lampholder system.
Reclose the housing and tighten the fastening screws.
Do not operate this device with opened service-lids !

2.2 Beampath

APERTURE 15°
APERTURE 21°
APERTURE 28°
Top-scanner of the upper performance sector
For extremely bright 1,200 W HMI-lamp • Colour-system: 2 colour-wheels and 1 effect-wheel • Colour-wheel 1
with 8 different, dichroic colour-filtres and white • Colour-wheel 2 with 5 different, dichroic colour-filtres and white
and additionally with correction-filters 3,200 K and 6,000 K and UV-filter • Via the two correction-filters, up to 81
different colours and semi-colours can be created • Rainbow-effect in both directions • Colour-macro-function
for easy selection of the colour-combinations • Effect-wheel with rotating 3-facet-prism, 5-facet-prism, 3D-prism
and frost-filter • The prisms rotate in both directions and at different speeds • Gobos: all gobos are exchangeable
(Rosco "D" size) • Gobo-wheel 1 with 5 static metal-gobos and open • Gobo-wheel 2 with 2 rotating metal-gobos,
1 glass-gobo, 1 multicolor-dichro-gobo and open • The rotating gobos can be turned by 360°, the adjusted
position is memorized • Motorized multi-step-zoom with three different apertures (15°, 21° and 28°) • Motorized
focus controllable via DMX • Steplessly adjustable iris • Shutter controlled via 2 stepper-motors • Mechanical
dimmer for adjusting the brightness of the light-output between 0 % and 100 % • Strobe-effect with adjustable
speed (1-10 flashes/sec.) via shutter • Integrated control-unit for digital adjustment of the starting-address, Pan/
Tilt-reverse, resolution of the mirror-movement, display of the operating-hours, switching the lamp, test-program
and reset • Special functions of the control-unit: manual control, automatic switching of the lamp, display of the
DMX-values, automatic display-blackout, adjustment of the display-intensity, switching the lamp via DMX,
temperature-display, adjustment of the cooling-fan speed and setting back the projector to default settings •
DMX-control via every standard DMX-controller • 16/14 DMX-control-channels required • Suitable FUTURELIGHT
controllers: C-128 controller, CP-192 controller • 14 high-quality stepping-motors • 16-bit-resolution or 8-bit-
resolution for the mirror-movements (64 microsteps) • Reduced noise via adjustable fan-power • Self-resetable
thermo-fuse
OBJECTIVE 15° WITH FROST
OBJECTIVE 21° WITH FROST
OBJECTIVE 28° WITH FROST
23