Mirror Image Function - Sony LH61 Bedienungsanleitung

5-14-6. Mirror image function

The data for each axis can be reversed with the mirror image unction. Mirror image machining
can be executed by reversing the program data.
Operating Procedure
Setting and confirmation
Select the program execution mode.
If the
each axis is displayed, the present status
will be displayed.
(Perform this operation before pressing the
START
H
P r e s s t h e C a n c e l k e y , a n d t h e
confirmation display will be canceled.
Reverse the X-axis
Select the X-axis.
X
Depressing the
X-axis.
Depressing the
X-axis to normal.
Press the Function setting key to end the
SET
setting.
L
Press the Execute key to execute the mirror image operation.
START
H
Mirror image data is lost when the power is turned off. It should be set before use after the power
is turned on. As the settings remain while power is on after settings have been made, you should
confirm the previous settings before use when running a program.
key is pressed when the data for
key.)
key once reverses the
X
key again returns the
X
The X-axis of the
program is reversed.
The X- and Y-axes of the
program are reversed.
Note
Display
X
Y
Z
X
Y
Z
Y-axis
The program data is
normal.
The Y-axis of the
program is reversed.
BH PRG REF
BH PRG REF
X-axis
57