Program Execution - Sony LH61 Bedienungsanleitung

5-14-4. Program execution

Select the program execution mode.
Operating Procedure
Call the program.
START
H
Move the scale so that the X, Y and Z axes
display "0".
An arrow indicator appears on the moved
axis.
When the value approaches "0", the arrow
indicator flashes. When the value is equal
to "0", the arrow indicator goes out.
(Determination of equality to "0" is within 3
counts.)
Note
• If the scale is moved at high speed, the
arrow indicator may not go out even
though "0" is passed.
• See 5-14-8 for the range in which the
arrow indicator starts to flash.
Call the program.
START
H
Move the scale so that the X, Y and Z axes
display "0".
Call the program.
START
H
End of the program.
Press the Cancel key to end the program.
Display
After approx. 2 seconds
INC
mm
INC
mm
INC
mm
INC
mm
INC
mm
INC
mm
After approx. 2 seconds
INC
mm
INC
mm
INC
mm
INC
mm
INC
mm
INC
mm
After approx. 2 seconds
Present value display
BH PRG REF
Flashes
BH PRG REF
Flashes
BH PRG REF
Lights up
BH PRG REF
Flashes
BH PRG REF
Flashes
BH PRG REF
Lights up
BH PRG REF
Flashes
BH PRG REF
Lights up
BH PRG REF
Off
55