Tabelle 10-11: Beispiel Einer Maschinen-Konfigurationsdatei Für Den Seriellen Ungesicherten - Siemens SINUMERIK 810D Handbuch

DNC Plant/DNC Cell (FBDN1)
10 Konfiguration
Interne Festlegung für SINUMERIK*/802D/840C
Anzahl signifikanter Zeilen:
Programmanfangskennung:
Programm-Endekennung:
Programm-Endekennung2
Standard-Maschinen-Konfigurationsdatei für den seriellen ungesicherten
Anschluss
Tabelle 10-11: Beispiel einer Maschinen-Konfigurationsdatei für den seriellen ungesicherten Anschluss
; MCIS DNC V2 Machine configuration templatefile
; Base: "__standard-serial.MCF"
; more infos see the machine configuration documentation on
; Install-CDROM in "IBS_Docu\Machine-configuration-docu\*.pdf"
;
[GLOBAL]
MachineType=serial
MachineServer=SerIntSvr.Machine
;
[SERINTSVR]
;CNCConverter=DNCConv.CodeConvert
CNCConverter=
;Server for Code conversion
[DNCConv]
;CNCcode= (ASCII,ISO,EIA)
CNCcode=ISO
;Serial COM-port Paramter
[COM]
;---CommPort---:
ComPort = 2
;---BaudRate---: 110, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400 ;57600, 115200
Bd
BaudRate = 9600
;---ByteSize---: 6,7,8
ByteSize = 8
;---StopBits---: 1, 2
StopBits = 1
;---Parity---: No=N, Odd=O, Even=E; Mark=M; Space=S
Parity = N
;---FlowCtrl---: DTRDSR, RTSCTS, XONXOFF, NONE
FlowCtrl = RTSCTS
;---XON/XOFF---: in ASCII-decimal- Code (0 ... 255)
XONChar=17
XOFFChar=19
;---Binary---: 0= NO 1 = YES (transfermode: 0=ASCII, 1=binary)
Binary = 0
;Program Output Parameter
[SEND]
;Parameters in ASCII- Dezimal- Code (0 ... 255)
;---ProgramStart---: (character, added before each file)
ProgramStart=0
;---ProgramEnd---: (character, added after each file)
ProgramEnd=0
;---CommentStart---: (character which marks the begin of an comment)
CommentStart=40
;---CommentEnd---: (character which marks the end of an comment)
CommentEnd=41
;---HeaderChar---: (character, added "HeaderSize"-times before each file)
HeaderChar=0
;---TrailerChar---: (character, added "TrailerSize"-times before each file)
TrailerChar=0
;---HeaderSize---: (Size in Bytes to add Parameter "HeaderChar" before each file)
HeaderSize=0
;---TrailerSize---: (Size in Bytes to add Parameter "TrailerChar" after each file)
TrailerSize=0
;---SpacerChar---: (character, added "SpacerSize"-times before/after each
SpacerMark)
SpacerChar=0
;---SpacerSize---: (Size in Bytes to add Parameter "SpacerChar" before/after each
SpacerMark)
FBDN1/10-164
1=COM1 ... 16=COM16
3
%
M30
M17
© Siemens AG 2011 All Rights Reserved
Motion Control Information System DNC (FBDN) - 09/2011
09/2011