Eamer Rinding; Gear Hob Grinding; Pinion Cutter Grinding; Plane Grinding - Holzmann UWS 320 Bedienungsanleitung

OPERATION INSTRUCTIONS
15.11 Reamer Grinding
The double apexes jig and dish type wheel will be used. The stop dog rest stands up to the inner
part of the blade. The right hand divides the tooth. The left hand moves the working table trans-
versely and grinds.

15.12 Gear Hob Grinding

The stem and double apexes jig will be used. The stop dog rest stands up to the front blade. Use
two hands to operate grinding.

15.13 Pinion Cutter Grinding

The electric headstock and step stem jig will be used. Turn the pillar right through an angle of
30º. Turn the headstock left through an angle of 75º--80º and fasten it. Press the button to start
the headstock and sand wheel. Move the working table transversely and grind.

15.14 Plane Grinding

The electric-magnetic sucker plate will be fixed on the working table to do plane grinding.
HOLZMANN Maschinen Austria ξ www.holzmann-maschinen.at
Seite 34
Universal Werkzeugschärfmaschine / universal tool grinding machine UWS 320