Bcd Output (Only Bcd Model); Connector Pin Assignment - Sony LT10-105 Bedienungsanleitung

7. BCD output (only BCD model)

The maximum, minimum, and peak-to-peak data is output
from the BCD connetor. There are also features for alarm
output, start or reset input, comparator value selection input
and measuring mode (current value, maximum value,
mimimum value, peak-to peak value) selection input. The
output is all an open collector equivalent to the IC "74LS06".
With the 2 channel model, both channel A and B have the
same features.

7-1. Connector pin assignment

As seen from the rear of the display unit.
18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
36 35 34 33 32 31 30 29 28 27
Connector to be procured
Manufactured by Hirose Electric, Co., LTD
DX10-36S (Display unit receptacle)
DX40-36P (Plug: accessory)
DX-36-CV (Plug case: accessory)
26 25 24 23 22 21 20 19
Signal
Pin
Signal
No.
1 1st digit Q1 (A)
2 Q2 (B)
3 Q3(C)
4 Q4 (D)
5 2nd digit Q1 (A)
6 Q2 (B)
7 Q3 (C)
8 Q4 (D)
9 3rd digit Q1 (A)
10 Q2 (B)
11 Q3 (C)
12 Q4 (D)
13 4th digit Q1 (A)
14 Q2 (B)
15 Q3 (C)
16 Q4 (D)
17 5th digit Q1 (A)
18 Q2 (B)
Pin
Signal
No.
19 Q3 (C)
20 Q4 (D)
21 MOD 0
22 MOD 1
23 M-VALID
24 Connection prohibited
25 Connection prohibited
26 GND
27 GND
28 GND
29 SIGN output
30 DRQ input
31 READY output
32 Start input
33 Reset input
34 Alarm output
35 Comparator value selection A
36 Comparator value selection B
63