Sony LT10-105 Bedienungsanleitung Seite 84

Model
Item
Peak hold function
Resolution
Direction
Maximum response acceleration
Maximum response speed
Addition and subtraction function
Alarm
Data storage
Temperature
Power consumption
Mass
Power voltage
Compatible measuring probe
∗ 3: BCD (36 pin half-pitch connector)
Input : Reset, peak-hold start, comparator value selection (4 settings)
Output : Five digits (open collector)
One of current value/maximum value/minimum value/peak-to-peak
76 value selected and output.
Alarm output
LT10-105 105B
LT11-101 101B
Maximum, minimum, and peak-to-peak values. Measuring started by start input of terminals.
Can be started with
—
the BCD terminal.
0.001 mm, 0.005 mm, 0.01 mm (0.0001", 0.0002", 0.0005") selectable (0.001 mm (0.0001") is LT11 series only.)
2400 m/s
—
Acceleration or level over (Displayed on LCD or terminals' comparator outputs are all "H" (OFF).)
BCD alarm
—
terminal "H " (OFF)
Resolution, direction, comparator value, preset value, modes.
— BCD sign
Operating temperature: 0 to 40°C Storage temperature: –10 to 50°C
1.8 W 2.9 W
Approx. 185 g Approx. 215 g
Terminals: DC10.8 to 26.4 V DC IN jack: DC 9V AC power adapter.
105C
101C
RS-232C can set
or start.
Can be switched
2
60 m/min
A+B, A–B, B–A can be set with the direction setting.
—
Data signalling rate, etc.
2.0 W
Approx. 205 g Approx. 190 g
DT series
∗ 4: RS-232C (8 pin mini-DIN connector)
Reset, preset value setting/recall, peak-hold start, comparator value
setting, current value/maximum value/minimum value/peak-to-peak value
selection and output.
∗ 5: EXT.IN terminal (mini-jack)
Data output start
205 205B
201 201B
Can be started with
—
the BCD terminal.
1500 m/s 2
BCD alarm
terminal "H " (OFF)
— BCD sign
2.9 W 5.2 W
Approx. 250 g
205C
201C
RS-232C can set
or start.
—
Data signalling rate, etc.
3.1 W
Approx. 210 g