Sony LT10-105 Bedienungsanleitung Seite 63

5. Setting the parity
is displayed and the
parity can be switched on or off.
: No parity
: Parity
Note
When the data length is set to 7 bits
in step 3, select "Parity".
6. Selecting odd or even parity
Switches to this mode when
is chosen above.
: Odd parity
: Even parity
7. Selecting the function for the EXT.IN terminal
: Mode for using the
PZ201 foot-switch
(sold separately).
: Mode for shortening
the output interval to
less than given above.
: To output at a set
interval.
Note
H e r e t h e E X T . I N
terminal cannot be
used.
8. Selecting the output time interval.
This mode is selected when
step 7.
eight intervals can be chosen.
0.2, 0.5, 1.0, 5.0, 10, 20,
30, 60, 300 s
factory-set
9. Selecting the data transmission format
(2 channel models)
the following is chosen.
factory-set
• To output from channel A –12.345, and from channel
B 67.89:
(a) A–12.345MBM67.890
(b) A–12.345
M means a space.
factory-set
Initial settings are now complete for the RS-232C model.
Press
M O D E
MODE
is displayed and one of
is displayed and one of
: format (a) given below
: format (b) given below
C R L F
C R L F
BM67.890
Note
to return to the measuring state.
has been chosen in
factory-set
factory-set
C R L F
55