Function Description; Preset Functions - Sony LT10-105 Bedienungsanleitung

7
RS-232C interface
(See P68 "8. RS-232C Interface".)
Reset, peak-hold start, setting/recall of preset values,
setting the comparator value, selecting and outputting
the current value/maximum value/minimum value/
peak-to-peak value.
8
EXT. IN
(See P70 "8-6. Output".)
External input terminal for outputting data via a RS-232C
connector.
50

4-3. Function description

4-3-1. Reset key
Operation performed when reset
Display unit
key is pressed
Measuring mode Display is set to zero.
(Current value, maximum When a preset value has been set
value, minimum value, this is recalled.
peak-to-peak value)
Preset mode Preset value is set to zero.
(P and the selected digit
will flash.)
"Error" is displayed Device is cleared and then returnes
to the measuring state.
All the numbers for the Automatically carries out initialization
channel with an error to calibrate the device to a new
flash. measuring probe. (Before resetting
the measuring probe must be moved
at least 1 mm.)

4-3-2. Preset functions

• It is possible to set preset values for each of the current,
maximum, and minimum value measuring modes.
• For instructions on setting the preset value, please refer
to P56, "5-2-1. Setting the preset value."