Terminals I/O; Connector Pin Assignment - Sony LT10-105 Bedienungsanleitung

6. Terminals I/O

The terminals in the rear of the display unit have functions
for Go/No Go comparison, start input, reset input, and the
main power IN.

6-1. Connector pin assignment

Rear of display unit
• Use a shielded cable for connection to the FG pin on the
rear of the display unit.
(Prepare a shield cable by yourself.)
Cross section of the cable
60
1 2 3 4 5 6 7 8
9 0 !¡ !™ !£ !¢
Outer cover
Knitted shield
Signal
(See P50 "4-3. Function description".)
Pin Signal name
No.
1 CH model 2 CH model
GND
1
2 HI HI (A)
3
GO GO (A)
4
LO LO (A)
5
Connection prohibited HI (B)
6
Connection prohibited GO (B)
7
Connection prohibited LO (B)
8
GND
9
FG
10
START
11
RESET
12
DC IN 12 to 24V
13
GND
14
GND
• GND (pins 1, 8, !£ and !¢) and FG (pin 9) are connected
with a capacitor. (isolated with respect to DC)
Signal
Go/No Go output
High (A CH)
Go (A CH)
Low (A CH)
High (B CH)
Go (B CH)
Low (B CH)
Frame GND
Start/hold input
Reset/recall input
Main DC power (12 to 24V)
GND for power