Status Displays At The User Module - G&D LwLVision-USB 2.0 Installationsanleitung

Status displays
Section LED
CPU Active
Status

Status displays at the user module

Section LED
Power Red.
Main
Remote Active
Status
14 · G&D LwLVision-USB 2.0
Status Meaning
on Keyboard inputs or mouse gestures are transmitted to the
computer or the input lock (Timeout) is active.
off The connected computer is not operated at the moment.
on The connected computer supplies power through the con-
nected PS/2 and/or USB interface(s).
off There is no computer connected or the connected computer
does not supply power through the connected PS/2 and/or
USB interface(s).
blinking The PS/2 and/or USB interfaces of the computer module
cannot be initialised for transmitting keyboard and mouse
signals.
If necessary, restart the computer module.
Status Meaning
on The optional power pack is connected and provides the
required voltage (12 Volt).
off The optional power pack is not connected and/or could not
establish a connection to the mains.
on The main power supply provides the required voltage.
off The mains switch is turned off or the device could not be
connected to the mains.
on The computer can be or is operated at the remote console or
the input lock (Timeout) is active.
off The computer is operated at the local console or the input
lock (Timeout) is active.
blinking The remote console keyboard is not connected or is being
initialised.
on The controller for the input devices of the remote console
has been initialised successfully.
blinking The controller for the input devices of the remote console
cannot be initialised.
If necessary, restart the computer module.
USB 2.0
Devices
Power
Remote Local
Red.
Main
Active
Status