Wolf Garten Ambition Robo Scooter 300 Betriebsanleitung Seite 75

Near Wire Follow
P003
(Default = ON)
Max Near Wire
Follow Distance
P004
(Default = changed
based on the lawn
area)
Min Near Wire
Follow Distance
P005
(Default = 1)
Rain Sensor
P006
(Default = ON)
Rain Sensor
Sensitivity
P007
(Default = 25)
Sound
P008
(Default = ON)
Base Station
P009
(Default = ON)
Child Lock
P010
(Default = OFF)
Anti-Theft
P011
Change PIN code
P012
N/A
Statistics
P013
(Default = OFF)
Add Separated
P014
Zone
Remove Separated
P015
Zone
en
• When the unit completes its operation, or when the 'Home' button
instructs it to Go To Base, it drives itself to the Base Station.
• The unit drives along the Perimeter Wire with a dynamic offset (not
centered) to prevent wheel tracks along the same path. This return
behavior can be turned off.
• The maximum distance the unit will drive from wire when returning
to the Base Station.
• The distance does not represent actual units of measurement.
• The offset Distance values range from 1 to 12. They represent
different distances from the wire.
• The higher the Distance setting, the smaller the probability of tracks
along the perimeter.
• Perimeter Islands that are relatively close to the Perimeter Wire or
narrow passages may prevent the mower to complete its drive to the
Base Station in 'Near Wire Follow' mode. In such cases decrease the
distance to allow the mower to complete the drive to the Base Station.
• The minimum distance Robomow will drive from wire when returning
to the Base Station.
• The larger the number, the bigger the distance the mower will drive
from the wire while returns to the Base Station.
• The Rain Sensor feature halts operation on rainy or highly humid
weather.
• This is recommended for the health of the lawn. However, mowing
wet grass does not present any technical problem.
• The unit detects rain when the current reading value is below the set
Sensitivity value and postpones operation.
• The higher the Sensitivity setting, the more sensitive the unit is to rain
detection.
• Use the Sound option to turn all non-safety sounds off.
• This option should be used for a Separated Zone which has a Base
Station or when adding a Base Station to a model that does not have
one.
• If you have defined more than one zone, then select the relevant zone
before changing the setting.
• The Child Lock feature locks the buttons to prevent unintended
operation, especially by children.
• If the Child Lock is set to 'On', to operate the mower it is required to
first press one of the operating mode buttons and then to press the OK
button to confirm.
• Allows changing of the Anti-Theft PIN code.
• Enter a new code and then re-enter the new code for confirmation.
• N/A
• This menu is displayed only if P012 is set to 'On.
• Enables to send the operation statistics from the mower to the
manufacturer for diagnostics in case of problems.
• Enables the addition of a Separated Zone.
• L2 is displayed for Separated Zone A – press OK.
• Scroll to set the area of the Separated Zone and press OK.
• Enables the removal of a Separated Zone.
• Choose the Zone you ant to remove and press OK.
the unit
On/ OFF
1-12
1-5
On/ OFF
0-30
On/ OFF
On/ OFF
On/ OFF
0000
N/A
On/ OFF
L2
100
L2
L3
75