Manual Operation; Operation Mode - Wolf Garten Ambition Robo Scooter 300 Betriebsanleitung

6.3 Manual Operation

Manual Operation is used when mowing the lawn at unscheduled times.
To initiate Manual Operation when the unit is at the Base Station, press one of the buttons (except the STOP button) to
show the display.
If the battery is fully charged and the mowing schedule is set to 'On', then the start time of the next operation is displayed,
otherwise the current day and time are displayed.
Once the display is shown, choose the operation mode you want as provided in the table below:

Operation Mode

Mowing with Edge –
Mowing the edge before starting to
mow the inner area.
It is recommended to use this mode
once or twice a week, depending on
how fast the grass is growing.
Mowing without Edge –
Mowing only the inner area without
the edge.
It is recommended to use this mode
only in the first operation of each
Mowing Cycle.
Note – if a Sub-Zone is defined, then once you choose the Operation Mode, then L1 (Main Zone) will be displayed. Use
the arrow buttons to scroll and choose the required zone to be mowed and press OK.
72
Child Lock is Off
Press the 'Edge before mowing' (left
arrow) button once
Press the 'Mowing' (right arrow)
button once
Child Lock is On
Press the 'Edge before mowing' (left
arrow) button then press OK
Press the 'Mowing' (right arrow)
button then press OK
en