Wolf Garten Ambition Robo Scooter 300 Betriebsanleitung Seite 67

•
Hold the Perimeter Switch and squeeze its side tabs (1) to
remove it from the back cover (2).
•
Connect the Power Supply plug to the Perimeter Switch board.
Replace the cover.
•
Connect the power supply to a regular power outlet (230V /
120V).
! !
IMPORTANT
The Power Supply is for indoor use ONLY.
Choose a sheltered, dry, and well ventilated location that is NOT exposed to direct sunlight, water, or rain.
•
Press the 'ON' button on the Perimeter Switch.
A small flashing green light next to the 'ON' button indicates the system is on and functioning correctly.
The control panel has other indicators: a disconnected or broken Perimeter Wire and a poor splicing (connection) in the
Perimeter Wire.
The Perimeter Switch has an automatic shutoff feature. There is no need to turn it off after each use. The Perimeter
Switch will shut itself off after 12 hours of operation. You may manually turn it off by pressing the ON/OFF button and
holding it for 3 seconds. A beep will sound to indicate that the Perimeter Switch is off.
The Perimeter Switch can be operated by a rechargeable battery (available as an accessory).
en
67