Changing The Timing Belt - Holzmann HBS 230HQ Betriebsanleitung

18.3

Changing the timing belt

1.
 Relax the saw blade with the blade tension knob
2.
 Open the lower saw band cover and remove the bandsaw blade from
the drive shaft.
 WARNING: gloves for the sawblade use !
3.
4.
 Remove the outer retaining ring with the outer retaining ring
pliers.
5.
 Remove the drive roller of the drive
 Replace timing belt and put the drive back to the drive
shaft.
 Attach retaining
 Insert timing belt in the desired
 Timing belt on the motor bracket
 Bandsaw hang on the drive roller and check the saw band
on good leadership.
 bandsaw tension
 Close Sawband cover
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
ring
pulleys.
clamp.
with knob.
Blade tension knob
3.
Loosen the timing belt on the motor
bracket with an Allen key and relaxing.
shaft.
MAINTENANCE
1.
2.
4.
5.
HOLZBANDSÄGE / WOOD BANDSAW HBS 230HQ
Seite 43