Upper Blade Guide Adjustment - Holzmann HBS 230HQ Betriebsanleitung

16.3.1 Upper blade guide adjustment

The height of the guide must be adjusted prior to each work so that the saw band about 10 mm
ends to the workpiece.
 The Locking knob loosen and adjust the appropriate level with the Adjusting knob and then
secure again.
Adjusting
knob
B
 Loosen the knob screw (A) and adjust the guide pin so that the distance between the guide
pin is to the saw teeth 1 to 2 mm side. Then fix again.
 Loosen the knob bolt (B) and adjust the thrust bearing back so that the distance from the
thrust bearing back of the saw blade is ca.0,5mm. Then fix again.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
Locking knob
Upper blade guide
A
HOLZBANDSÄGE / WOOD BANDSAW HBS 230HQ
OPERATION
Seite 38