Using Push Stick; Saw; Connecting To Dust Collector - Holzmann HBS 230HQ Betriebsanleitung

17.1.2 Using push stick

The push stick protects against contact with the saw band
 The push stick must always be used when the
distance between Band saw blade and and rip
fence is less than 150mm.
 If the sliding floor is not used to deposit on the
hook
 If damaged, the push stick must be immersed
immediately

17.1.3 Saw

 Put the workpiece securely on the table on
 Observe the workpiece from start to finish exactly
 Saw the section without interruption in a train
 Turn off the machine after work immediately

17.1.4 Connecting to dust collector

At an extraction suction can be connected. If this is not required, the wood chips collect in the
loading below the lower tape roll.
This dust drawer is to be emptied after use of the machine.
Dust port
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
W A R N I N G
Dust drawer
HOLZBANDSÄGE / WOOD BANDSAW HBS 230HQ
OPERATION
Seite 40