Changing The V-Ribbed Belt - Holzmann HBS245HQ Betriebsanleitung

15.4

Changing the v-ribbed belt

1.
 Relax the saw blade with the blade tension knob.
2.
 Open the lower saw band cover and remove the bandsaw blade from
the drive shaft.
 WARNING: gloves for the sawblade use !
3.
4.
 Remove the outer retaining ring with the outer retaining ring
pliers.
5.
 Remove the drive roller of the drive
 Replace v-ripped
shaft.
 Attach retaining ring
 Insert v-ripped belt in the desired
 ripped v-belt tension on the engine
 Bandsaw blade on the drive roller
saw band in on good
 saw band tension with
 Close Sawband cover
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
shaft.
belt and put the drive back to the drive
pulleys.
mount.
hang up
leadership.
knob.
Blade tension knob
3.

Loosen the v-ripped belt on the motor bracket with an
Allen key and relaxing.
and check the
HOLZBANDSÄGE / WOOD BANDSAW / SEGA PER LEGNO
MAINTENANCE
1.
2.
4.
5.
47
HBS245HQ