Changing The Band Saw Blade - Holzmann HBS 230HQ Betriebsanleitung

18.2

Changing the band saw blade

Wear gloves when handling with saw blades!
Before changing the blade, check that the machine is swiched off and
disconet from the power suply
ATTENTION: Take care to install the saw band correctly!
Check the direction of the teething
 Unscrew the D-nut and wing screw on the worktable.
 Open the upper and the lower cover.
 Set the upper saw band guide in the lowest position
 Open the cover of upper guide assembly
 Loosen the quick release handle
 Remove the band saw blade from the machine.
 Insert a new bandsaw blade with the right direction
on the rubber tyres on the band saw wheels.
 Then proceed as described in section 8.2.3 and check
the declared adjustment.
Upper Cover
cover of upper guide
Lower Cover
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
W A R N I N G
HIGHEST RISK OF CUTTING INJURY!
MAINTENANCE
D-nut
Wing screw
HOLZBANDSÄGE / WOOD BANDSAW HBS 230HQ
Seite 42