Changing The Band Saw Blade - Holzmann HBS245HQ Betriebsanleitung

15.3

Changing the band saw blade

Wear gloves when handling with saw blades!
Before changing the blade, check that the machine is swiched
off and disconet from the power suply
ATTENTION: Take care to install the saw band correctly!
Check the direction of the teething
 Loosen four lock knobs for the guide rail, and pull out the guide rail (Fig.n;1n).
 Open the upper cover and lower cover.
 Set the upper blade guide to its lowest position (Fig.o;1o).
 Loosen saw blade tension knob until the band saw blade has slackened.
 Remove the band saw blade from the machine.
 Fit a fresh band saw blade and center band saw blade on the rubber tyres of the band saw
wheels.
 Tighten the saw blade tension knob.
 Replaced the guide rail to its original position.
 Close the upper and lower cover.
Next:
 Align the saw blade
 Adjust the blade tension
 Adjust the upper blade guide and lower blade guide
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
W A R N I N G
HIGHEST RISK OF CUTTING INJURY!
HOLZBANDSÄGE / WOOD BANDSAW / SEGA PER LEGNO
MAINTENANCE
46
HBS245HQ