Herunterladen Inhalt Inhalt Diese Seite drucken

Vertical Alignment - Powerfix KH 3007 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
IB_KH3007_BL5781_EN.qxd

Vertical Alignment

1. Position the laser appliance with the
side plate
f
on a level surface or on
a tripod.
2. Align the laser appliance vertically with
the spirit level
a
adjustment wheel
Note:
The air-bubbles in the spirit level
must be positioned between the two
markings.
Projection of lines, levels and
points
Line function
1. Align the laser appliance either hori-
zontally or vertically.
2. Switch the laser appliance on.
t
Both laser lenses
beam.
3. Turn the rotary head
lens
u
in the direction of the surface on
which you wish to project the line.
4. Press the button LINE
movement of the rotary
jected (see Fig.
Press the button LINE
duce or enlarge the line in three levels.
5. To terminate the line function, switch
the laser appliance off and then back on.
Rotation function
1. Align the laser appliance either hori-
zontally or vertically.
2. Switch the laser appliance on.
Both laser lenses
t
beam.
27.06.2007
11:34 Uhr
, by turning the rear
h
.
a
u
and
project a laser
y
with the laser
w
. Through the
y
a line is pro-
).
w
repeatedly to re-
and
u
project a laser
Seite 7
3. Press the button ROTATION
rotary head
y
rotates at the highest
speed and projects the laser beam over
the whole surface (see Fig.
Press the button ROTATION
to reduce the speed of rotation in three
levels resp. to terminate the rotation.
Point function
1. Align the laser appliance horizontally.
2. Switch the laser appliance on.
The upper laser lens
line vertically to the base plate
horizontally to the side plate
an angle of 90° to the rotational laser
beam (See Fig.
).
3. Turn the rotation head
project points at an angle of 90° to
the plumb line with the laser lens
(See Fig.
).
Utilisation glasses
Wear the utilisation glasses (see Fig.
to be able to see the laser line better in
unfavourable light conditions.
Note:
The utilisation glasses DO NOT protect
your eyes from the laser beam! NEVER
look directly into the laser beam!
- 7 -
e
. The
and
).
e
repeatedly
t
projects a plumb
s
resp.
f
resp. at
y
by hand to
u
)

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis