Sony RM-VZ950T Bedienungsanleitung Seite 9

Example: To set up a Philips' TV
at "S-1/TV"
1
See the tables in the
supplied "Component
Code Numbers," and find
the three-digit code number
for the desired component.
If more than one code number
is listed, use the number that is
listed first.
For example, to set up a
Philips' TV, you would use the
code number 086.
2
Press SET.
"PRESET" flashes in the
display, and the Commander
changes to SET mode.
R P
S E
3
Press the Jog dial.
The Setting position number
flashes, and the component
name appears in the display.
The Commander changes to
the Component PRESET mode.
S -1
V T
P R
Note
If you have changed the name of
the component (page 26) that name
is displayed.
ES ET
T
E S E T
4
Turn the Jog dial to select
the Setting position number
("S-1" to "S-8").
Each time you turn the Jog dial,
the display changes as follows.
S-1 S-2
TV SAT
EXIT
Notes
• If you have changed the names of
the components (page 26) those
names are displayed.
• If you press the Jog dial at "EXIT,"
the Commander returns to the top
of SET mode (Step 2).
5
Press the Jog dial.
The component name flashes
in the display.
S
V T
P R
Note
The component names displayed at
this point represent the type of the
component to operate. These names
cannot be changed.
If you want to set a different
component to this Setting
position number, turn the Jog
dial to select the desired
component. The display
changes as shown below.
TV SAT
EXIT
S-3 S-4
VCR DVD
S-8 S-7
AMP TAPE
-1
¢ ¢1
E S E T
VCR DVD
AMP TAPE
Continued
S-5
CD
S-6
MD
CD
MD
9
GB