Sat; Vcr - Sony RM-VZ950T Bedienungsanleitung

SAT

KEY FUNCTION
qa1 To turn the power on/
off.
31 – 9, 0 To change the
programme.
Also to turn on.
4-/-- To select double-digit
numbers.
Works in the same way
as the TV's commander.
5RED, Fastext buttons
GREEN,
YELLOW,
BLUE
2t To switch the output of
the SAT receiver to the
TV*.
qsa (EPG) To turn the EPG display
on/off .
1/ (GUIDE) To bring up Master
Guide.
qd2- (EXIT) To exit the mode.
7MENU To call up the MENU
display.
6v To move the cursor
upward.
6V To move the cursor
downward.
6B To move the cursor to
the right.
6b To move the cursor to
the left.
qfOK To bring up the Station
Index when a program
guide is not displayed.
To select the programme
that is highlighted.
qgPROGR +/– Channel up: +
Channel down: –
qh To operate JUMP,
FLASHBACK or
PROGRAMME
RETURN function on
the SAT depending on
the setting of the SAT's
manufacturer.
* When you connect a TV cable or
antenna to the SAT, the output
switches between the TV and SAT
programme.

VCR

KEY FUNCTION
qa1 To turn the power on/
off.
31 – 9, 0 To change the
programme.
Also to turn on.
2t To select the input
source. The source
changes each time you
press the button.
6m To rewind.
6N To play.
6M To fast-forward.
7z To record, press N
while pressing z**. First
release N, then release
z.
6x To stop.
qfX To pause.
qgPROGR +/– Programme up: +
Programme down: –
qd2- To select a number
between 20 and 29.
4-/--, 1- To select double-digit
numbers.
Works in the same way
as the VCR's
commander.
**You can assign this operation to a
single button (z) using the Learning
function (page 15).
Continued
39
GB