Sony RM-VZ950T Bedienungsanleitung Seite 29

To reset the name of the
component back to the initial
factory preset
Tip
You can also press b/B instead of
turning the Jog dial to the left/right.
You can also press OK instead of
pressing the Jog dial.
Example: To reset the changed
name at "S-3" to the factory
preset
1
2
Jog
dial
3
Follow Steps 1 to 2 on page
27. Then turn the Jog dial to
select "INIT."
"INIT." flashes in the display.
S -3
N I IT
N A M E
Press the Jog dial.
The factory preset component
name of the selected Setting
position number flashes in the
display.
S -3
C V R
N A M E
If you want to reset the names
for other Setting position
numbers, turn the Jog dial to
select "EXIT," press the Jog
dial, and repeat from Steps 1 to
2.
Select "EXIT," then press
the Jog dial to finish setting.
.
29
GB