Changing the Name of the
Component (NAME) (continued)
Each time you turn the Jog dial,
the characters change as listed
below:
Capital letters of the English
alphabet.
Small letters of the English
alphabet.
Numbers 0 to 9
Symbols –, . (dot), /, ?, :
(colon), @, <<, >>, (space)
Tip
It is useful that you take a note of
the names.
5
Press the Jog dial to move
to the next character field,
and enter the next
character.
You can enter up to six
characters.
You can freely change a
character by pressing b or B to
move the cursor to the desired
character field.
S
-3
S
C
N A
Note
If you press SET during this
procedure, the name written thus
far is saved as the new name.
28
GB
R
M E
After you finish entering the
sixth character, "EXIT" flashes
in the display.
X E
IT
N A
6
Press the Jog dial.
The component name of the
next Setting position number
flashes in the display.
S
-4
V D
N A
If you want to change the name
for another component, repeat
from Step 3.
7
Press SET.
The newly written component
name appears in the display.
O S
NY
M E
D
M E
DV